用Python实现与USB设备的通信

本文介绍了用Python实现与USB设备的通信的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我要与USB设备通信并向其发送数据。我能够找到该设备，但是在将该设备与内核驱动程序连接时，它提供了USB Error: Resource Busy。以下是我的代码：

import usb

dev = usb.core.find(idVendor=0x0403, idProduct=0x6001)
dev.set_configuration()

cfg = dev.get_active_configuration()

dev.attach_kernel_driver(interface)

interface_number = cfg[(0, 0)].bInterfaceNumber
alternate_settting = usb.control.get_interface(interface_number)
intf = usb.util.find_descriptor(
    cfg, bInterfaceNumber=interface_number,
    bAlternateSetting=alternate_setting)

ep = usb.util.find_descriptor(
    intf, custom_match=lambda e:
    usb.util.endpoint_direction(e.bEndpointAddress) == usb.util.ENDPOINT_OUT)

dev.detach_kernel_driver(interface)

ep.write("
" + linea1[:19] + "

" + " " * (20 - len(linea2)) + linea2)

推荐答案

假定您使用的是linux，并且libusb-1.0是PyUSB的后端库。

根据libusb documentation：

// Detach a kernel driver from an interface.
// If successful, you will then be able to claim the interface and perform I/O.
int libusb_detach_kernel_driver (libusb_device_handle *dev,
                                 int interface_number)

// Re-attach an interface's kernel driver, which was previously
// detached using libusb_detach_kernel_driver().
int libusb_attach_kernel_driver(libusb_device_handle *dev,
                                int interface_number)

因此，基本上，您需要首先调用detach_kernel_driver从设备接口分离已经附加的内核驱动程序(如果有)，这样您就可以在代码中与其通信(它可以是您的代码，也可以是与设备接口对话的某个内核驱动程序)。完成后，您可能需要调用attach_kernel_driver重新附加内核驱动程序。

我相信，如果您可以确保没有为给定设备加载内核驱动程序(或者在运行代码之前手动卸载它)，那么就不需要调用这些C函数/Python方法中的任何一个。

编辑：

我刚刚让这段代码(基于您的示例)正常工作。注意：为简单起见，我已将detach_kernel_driver和attach_kernel_driver的接口编号硬编码为0-我想您应该使其更智能。

import usb

dev = usb.core.find(idVendor=0x0403, idProduct=0x6001)

reattach = False
if dev.is_kernel_driver_active(0):
    reattach = True
    dev.detach_kernel_driver(0)

dev.set_configuration()
cfg = dev.get_active_configuration()

interface_number = cfg[(0,0)].bInterfaceNumber
alternate_settting = usb.control.get_interface(dev, interface_number)
intf = usb.util.find_descriptor(cfg, bInterfaceNumber = interface_number,
                            bAlternateSetting = alternate_settting)

ep = usb.util.find_descriptor(intf,custom_match =
      lambda e:
    usb.util.endpoint_direction(e.bEndpointAddress) ==
    usb.util.ENDPOINT_OUT)
ep.write("test

")

# This is needed to release interface, otherwise attach_kernel_driver fails
# due to "Resource busy"
usb.util.dispose_resources(dev)

# It may raise USBError if there's e.g. no kernel driver loaded at all
if reattach:
    dev.attach_kernel_driver(0)