本文介绍了升级到Message Analyzer后的Network Monitor 3.4的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

升级到Message Analyzer后,Network Monitor 3.4无法在wlan界面上找到流量。 wlan接口不再列为网络监视器中的源。 Network Monitor 3驱动程序显示为绑定到wlan界面。

After upgrading to Message Analyser, Network Monitor 3.4 is unable find traffic on the wlan interface. The wlan interface is no longer listed as a source within Network Monitor. The Network Monitor 3 driver appears as bound to the wlan interface.

在安装Message Analyzer之前,Network Monitor 3.4安装已经正常工作至少3年(之前的旧版本)。我使用网络监视器,因为它给了我一些WireShark中没有的信息。 Wireshark仍在工作
罚款。

The Network Monitor 3.4 installation had been working fine for at least 3 years (older versions before that) before the Message Analyser install. I use Network Monitor because it gives me some information not available in WireShark. Wireshark still working fine.

我有一种感觉,原始网络监视器安装是通过.MSI文件 - 而不是.exe似乎现在。

I have a feeling the original Network Monitor install was via an .MSI file - rather than the .exe it seems to be now.

我有: -

1。卸载消息分析器&重启。

1. Uninstalled Message Analyser & rebooted.

2。卸载网络监视器,重新启动&重新安装。重新安装没有任何错误,但没有wlan

2. Uninstalled Network Monitor, rebooted & reinstalled. Reinstalled with no errors, but no wlan

3。阅读有关资源和VMware问题的说明 - 所以VMware播放器和所有驱动程序也都消失了。重新安装网络监视器 - 没有错误,但没有wlan。

3. Read a note about issues with resources and VMware - so VMware player and all drivers gone too. Reinstalled Network Monitor - no errors, but no wlan.

使用戴尔Latitude 5500,4GB RAM,Windows 7 Pro Build 7601

Using Dell Latitude 5500, 4GB RAM, Windows 7 Pro Build 7601

推荐答案


这篇关于升级到Message Analyzer后的Network Monitor 3.4的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持!

10-20 00:44