访问外部接口最全总结

访问外部接口最全总结

关注
发信
关注(28)粉丝(399)

Tomcat详解系列(3) - 源码分析准备和分析入口

Tomcat - 源码分析准备和分析入口

源代码下载和编译

首先是去官网下载Tomcat的源代码和二进制安装包，我这里分析最新的Tomcat9.0.39稳定版本https://tomcat.apache.org/download-90.cgi

下载二进制包和源码

  • 下载两个包

Tomcat详解系列(3) - 源码分析准备和分析入口-LMLPHP

  • 查看二进制包中主要模块

Tomcat详解系列(3) - 源码分析准备和分析入口-LMLPHP

编译源码

  • 导入IDEA

Tomcat详解系列(3) - 源码分析准备和分析入口-LMLPHP

  • 使用ant编译

Tomcat详解系列(3) - 源码分析准备和分析入口-LMLPHP

理解编译后模块

  • 编译的输出在哪里

Tomcat详解系列(3) - 源码分析准备和分析入口-LMLPHP

  • 编译的输出结果是否对的上，很显然和上面的二进制包一致

Tomcat详解系列(3) - 源码分析准备和分析入口-LMLPHP

从启动脚本定位Tomcat源码入口

startup.bat

  • startup.bat的源码: startup.bat文件实际上就做了一件事情: 启动catalina.bat.
@echo off
rem Licensed to the Apache Software Foundation (ASF) under one or more
rem contributor license agreements.  See the NOTICE file distributed with
rem this work for additional information regarding copyright ownership.
rem The ASF licenses this file to You under the Apache License, Version 2.0
rem (the "License"); you may not use this file except in compliance with
rem the License.  You may obtain a copy of the License at
rem
rem     http://www.apache.org/licenses/LICENSE-2.0
rem
rem Unless required by applicable law or agreed to in writing, software
rem distributed under the License is distributed on an "AS IS" BASIS,
rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rem See the License for the specific language governing permissions and
rem limitations under the License.

rem ---------------------------------------------------------------------------
rem Start script for the CATALINA Server
rem ---------------------------------------------------------------------------

setlocal

rem Guess CATALINA_HOME if not defined
set "CURRENT_DIR=%cd%"
if not "%CATALINA_HOME%" == "" goto gotHome
set "CATALINA_HOME=%CURRENT_DIR%"
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
cd ..
set "CATALINA_HOME=%cd%"
cd "%CURRENT_DIR%"
:gotHome
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
echo The CATALINA_HOME environment variable is not defined correctly
echo This environment variable is needed to run this program
goto end
:okHome

set "EXECUTABLE=%CATALINA_HOME%\bin\catalina.bat"

rem Check that target executable exists
if exist "%EXECUTABLE%" goto okExec
echo Cannot find "%EXECUTABLE%"
echo This file is needed to run this program
goto end
:okExec

rem Get remaining unshifted command line arguments and save them in the
set CMD_LINE_ARGS=
:setArgs
if ""%1""=="""" goto doneSetArgs
set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1
shift
goto setArgs
:doneSetArgs

call "%EXECUTABLE%" start %CMD_LINE_ARGS%

:end
  • 当然如果你感兴趣，不妨也可以看下上面脚本的含义
    • .bat文件中@echo是打印指令, 用于控制台输出信息, rem是注释符.
    • 跳过开头的注释, 我们来到配置CATALINA_HOME的代码段, 执行startup.bat文件首先会设置CATALINA_HOME.
    set "CURRENT_DIR=%cd%"
if not "%CATALINA_HOME%" == "" goto gotHome
set "CATALINA_HOME=%CURRENT_DIR%"
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
cd ..
set "CATALINA_HOME=%cd%"
cd "%CURRENT_DIR%"
:gotHome
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
echo The CATALINA_HOME environment variable is not defined correctly
echo This environment variable is needed to run this program
goto end
:okHome
    • 先通过set指令把当前目录设置到一个名为CURRENT_DIR的变量中,
    • 如果系统中配置过CATALINA_HOME则跳到gotHome代码段. 正常情况下我们的电脑都没有配置CATALINA_HOME, 所以往下执行, 把当前目录设置为CATALINA_HOME.
    • 然后判断CATALINA_HOME目录下是否存在catalina.bat文件, 如果存在就跳到okHome代码块.
    • 在okHome中, 会把catalina.bat文件的的路径赋给一个叫EXECUTABLE的变量, 然后会进一步判断这个路径是否存在, 存在则跳转到okExec代码块, 不存在的话会在控制台输出一些错误信息.
    • 在okExec中, 会把setArgs代码块的返回结果赋值给CMD_LINE_ARGS变量, 这个变量用于存储启动参数.
    • setArgs中首先会判断是否有参数, (if ""%1""==""""判断第一个参数是否为空), 如果没有参数则相当于参数项为空. 如果有参数则循环遍历所有的参数(每次拼接第一个参数).
    • 最后执行call "%EXECUTABLE%" start %CMD_LINE_ARGS%, 也就是说执行catalina.bat文件, 如果有参数则带上参数.

catalina.bat

  • 跳过开头的注释, 我们来到下面的代码段:
setlocal

rem Suppress Terminate batch job on CTRL+C
if not ""%1"" == ""run"" goto mainEntry
if "%TEMP%" == "" goto mainEntry
if exist "%TEMP%\%~nx0.run" goto mainEntry
echo Y>"%TEMP%\%~nx0.run"
if not exist "%TEMP%\%~nx0.run" goto mainEntry
echo Y>"%TEMP%\%~nx0.Y"
call "%~f0" %* <"%TEMP%\%~nx0.Y"
rem Use provided errorlevel
set RETVAL=%ERRORLEVEL%
del /Q "%TEMP%\%~nx0.Y" >NUL 2>&1
exit /B %RETVAL%
:mainEntry
del /Q "%TEMP%\%~nx0.run" >NUL 2>&1
  • 大多情况下我们启动tomcat都没有设置参数, 所以直接跳到mainEntry代码段, 删除了一个临时文件后, 继续往下执行.
rem Guess CATALINA_HOME if not defined
set "CURRENT_DIR=%cd%"
if not "%CATALINA_HOME%" == "" goto gotHome
set "CATALINA_HOME=%CURRENT_DIR%"
if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
cd ..
set "CATALINA_HOME=%cd%"
cd "%CURRENT_DIR%"
:gotHome

if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
echo The CATALINA_HOME environment variable is not defined correctly
echo This environment variable is needed to run this program
goto end
:okHome

rem Copy CATALINA_BASE from CATALINA_HOME if not defined
if not "%CATALINA_BASE%" == "" goto gotBase
set "CATALINA_BASE=%CATALINA_HOME%"
  • 可以看到这段代码与startup.bat中开头的代码相似, 在确定CATALINA_HOME下有catalina.bat后把CATALINA_HOME赋给变量CATALINA_BASE.
rem Get standard environment variables
if not exist "%CATALINA_BASE%\bin\setenv.bat" goto checkSetenvHome
call "%CATALINA_BASE%\bin\setenv.bat"
goto setenvDone
:checkSetenvHome
if exist "%CATALINA_HOME%\bin\setenv.bat" call "%CATALINA_HOME%\bin\setenv.bat"
:setenvDone

rem Get standard Java environment variables
if exist "%CATALINA_HOME%\bin\setclasspath.bat" goto okSetclasspath
echo Cannot find "%CATALINA_HOME%\bin\setclasspath.bat"
echo This file is needed to run this program
goto end
:okSetclasspath
call "%CATALINA_HOME%\bin\setclasspath.bat" %1
if errorlevel 1 goto end

rem Add on extra jar file to CLASSPATH
rem Note that there are no quotes as we do not want to introduce random
rem quotes into the CLASSPATH
if "%CLASSPATH%" == "" goto emptyClasspath
set "CLASSPATH=%CLASSPATH%;"
:emptyClasspath
set "CLASSPATH=%CLASSPATH%%CATALINA_HOME%\bin\bootstrap.jar"
  • 接下来从gotTmpdir代码块到noEndorsedVar代码块进行了一些配置, 由于不是主要内容暂且跳过.
echo Using CATALINA_BASE:   "%CATALINA_BASE%"
echo Using CATALINA_HOME:   "%CATALINA_HOME%"
echo Using CATALINA_TMPDIR: "%CATALINA_TMPDIR%"
if ""%1"" == ""debug"" goto use_jdk
echo Using JRE_HOME:        "%JRE_HOME%"
goto java_dir_displayed
:use_jdk
echo Using JAVA_HOME:       "%JAVA_HOME%"
:java_dir_displayed
echo Using CLASSPATH:       "%CLASSPATH%"

set _EXECJAVA=%_RUNJAVA%
set MAINCLASS=org.apache.catalina.startup.Bootstrap
set ACTION=start
set SECURITY_POLICY_FILE=
set DEBUG_OPTS=
set JPDA=

if not ""%1"" == ""jpda"" goto noJpda
set JPDA=jpda
if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport
set JPDA_TRANSPORT=dt_socket
:gotJpdaTransport
if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
set JPDA_ADDRESS=8000
:gotJpdaAddress
if not "%JPDA_SUSPEND%" == "" goto gotJpdaSuspend
set JPDA_SUSPEND=n
:gotJpdaSuspend
if not "%JPDA_OPTS%" == "" goto gotJpdaOpts
set JPDA_OPTS=-agentlib:jdwp=transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
:gotJpdaOpts
shift
:noJpda

if ""%1"" == ""debug"" goto doDebug
if ""%1"" == ""run"" goto doRun
if ""%1"" == ""start"" goto doStart
if ""%1"" == ""stop"" goto doStop
if ""%1"" == ""configtest"" goto doConfigTest
if ""%1"" == ""version"" goto doVersion
  • 接下来, 我们能看到一些重要的信息, 其中的重点是:
set _EXECJAVA=%_RUNJAVA%, 设置了jdk中bin目录下的java.exe文件路径.
set MAINCLASS=org.apache.catalina.startup.Bootstrap, 设置了tomcat的启动类为Bootstrap这个类. (后面会分析这个类)
set ACTION=start设置tomcat启动

if not ""%1"" == ""jpda"" goto noJpda
set JPDA=jpda
if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport
set JPDA_TRANSPORT=dt_socket
:gotJpdaTransport
if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
set JPDA_ADDRESS=8000
:gotJpdaAddress
if not "%JPDA_SUSPEND%" == "" goto gotJpdaSuspend
set JPDA_SUSPEND=n
:gotJpdaSuspend
if not "%JPDA_OPTS%" == "" goto gotJpdaOpts
set JPDA_OPTS=-agentlib:jdwp=transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
:gotJpdaOpts
shift
:noJpda

if ""%1"" == ""debug"" goto doDebug
if ""%1"" == ""run"" goto doRun
if ""%1"" == ""start"" goto doStart
if ""%1"" == ""stop"" goto doStop
if ""%1"" == ""configtest"" goto doConfigTest
if ""%1"" == ""version"" goto doVersion
  • 接着判断第一个参数是否是jpda, 是则进行一些设定. 而正常情况下第一个参数是start, 所以跳过这段代码. 接着会判断第一个参数的内容, 根据判断, 我们会跳到doStart代码段. (有余力的同学不妨看下debug, run等启动方式)
:doStart
shift
if "%TITLE%" == "" set TITLE=Tomcat
set _EXECJAVA=start "%TITLE%" %_RUNJAVA%
if not ""%1"" == ""-security"" goto execCmd
shift
echo Using Security Manager
set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"
goto execCmd
  • 可以看到doStart中无非也是设定一些参数, 最终会跳转到execCmd代码段
:execCmd
rem Get remaining unshifted command line arguments and save them in the
set CMD_LINE_ARGS=
:setArgs
if ""%1""=="""" goto doneSetArgs
set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1
shift
goto setArgs
:doneSetArgs

rem Execute Java with the applicable properties
if not "%JPDA%" == "" goto doJpda
if not "%SECURITY_POLICY_FILE%" == "" goto doSecurity
%_EXECJAVA% %LOGGING_CONFIG% %LOGGING_MANAGER% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -D%ENDORSED_PROP%="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doSecurity
%_EXECJAVA% %LOGGING_CONFIG% %LOGGING_MANAGER% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -D%ENDORSED_PROP%="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doJpda
if not "%SECURITY_POLICY_FILE%" == "" goto doSecurityJpda
%_EXECJAVA% %LOGGING_CONFIG% %LOGGING_MANAGER% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -D%ENDORSED_PROP%="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end
:doSecurityJpda
%_EXECJAVA% %LOGGING_CONFIG% %LOGGING_MANAGER% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -D%ENDORSED_PROP%="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
goto end

:end
  • 跳过前面两行判断后, 来到了关键语句:
%_EXECJAVA% %LOGGING_CONFIG% %LOGGING_MANAGER% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -D%ENDORSED_PROP%="%JAVA_ENDORSED_DIRS%" -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%

总结:

  • catalina.bat最终执行了Bootstrap类中的main方法.
  • 我们可以通过设定不同的参数让tomcat以不同的方式运行. 在ide中我们是可以选择debug等模式启动tomcat的, 也可以为其配置参数, 在catalina.bat中我们看到了启动tomcat背后的运作流程.

参考文章

相关文章

04-02 13:35
Powered by LMLPHP ©2024 访问外部接口最全总结 0.096058