初始化
要用Serilog替换原生的Log，需要做如下配置：
添加Nuget：
dotnet add package Serilog.AspNetCore
修改Main方法
public static void Main(string[] args)
{
Log.Logger = new LoggerConfiguration()
.MinimumLevel.Information()
.MinimumLevel.Override("Microsoft", LogEventLevel.Warning)
.MinimumLevel.Override("Microsoft.AspNetCore", LogEventLevel.Warning)
.Enrich.FromLogContext()
.WriteTo.Console()
.CreateLogger();
try
{
Log.Information("Starting web host");
CreateHostBuilder(args).Build().Run();
}
catch (Exception ex)
{
Log.Fatal(ex, "Host terminated unexpectedly");
}
finally
{
Log.Information("Ending web host");
Log.CloseAndFlush();
}
}
UseSerilog()
public static IHostBuilder CreateHostBuilder(string[] args) =>
Host.CreateDefaultBuilder(args)
.UseSerilog()
.ConfigureWebHostDefaults(webBuilder => { webBuilder.UseStartup<Startup>(); });
经过这两处修改，就完成了用Serilog对原生的Log的替换。
主动记录日志
在需要记录日志的地方通过这样的代码可以获得log实例
private readonly ILogger log = Log.Logger;
Serilog定义的日志级别有：
- Verbose
- Debug
- Information
- Warning
- Error
- Fatal
原生log和Serilog的输出对比
在Web API模版项目中，LogLeve为默认"Microsoft": "Information"的情况下，针对一次API请求：对比下原生log和Serilog的输出： 原生Log：
info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
Request starting HTTP/1.1 GET http://localhost:5000/weatherforecast
info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
Executing endpoint 'SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest)'
info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[3]
Route matched with {action = "Get", controller = "WeatherForecast"}. Executing controller action with signature System.Collections.Generic.IEnumerable`1[SerilogTest.WeatherForecast] Get() on controller SerilogTest.Controllers.WeatherForecastController (SerilogTest).
info: Microsoft.AspNetCore.Mvc.Infrastructure.ObjectResultExecutor[1]
Executing ObjectResult, writing value of type 'SerilogTest.WeatherForecast[]'.
info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
Executed action SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest) in 21.2528ms
info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
Executed endpoint 'SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest)'
info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
Request finished in 102.3501ms 200 application/json; charset=utf-8
Serilog：
[22:12:13 INF] Request starting HTTP/1.1 GET http://localhost:5000/weatherforecast
[22:12:13 INF] Executing endpoint 'SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest)'
[22:12:13 INF] Route matched with {action = "Get", controller = "WeatherForecast"}. Executing controller action with signature System.Collections.Generic.IEnumerable`1[SerilogTest.WeatherForecast] Get() on controller SerilogTest.Controllers.WeatherForecastController (SerilogTest).
[22:12:13 INF] Executing ObjectResult, writing value of type 'SerilogTest.WeatherForecast[]'.
[22:12:13 INF] Executed action SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest) in 22.6404ms
[22:12:13 INF] Executed endpoint 'SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest)'
[22:12:13 INF] Request finished in 104.071ms 200 application/json; charset=utf-8
两者Log数量都是7条，Serilog相比原生log增加了时间信息，但缺少了输出日志组件的名称，整体来看Serilog的日志要更加紧凑。
使用RequestLoggingMiddleware
每次API请求都输出这么多日志信息，其中很多信息都是不被关心的，这些信息不仅会妨碍对有用信息的查找，还会为日志的存储造成负担。Serilog提供的RequestLogging中间件可以为每个请求记录一条单一的摘要日志。 首先，添加中间件:app.UseSerilogRequestLogging()
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
app.UseSerilogRequestLogging();
...
与管道中的其他中间件一样，顺序很重要。当请求到达RequestLoggingMiddleware中间件时，它将启动计时器，并将请求传递给后续中间件进行处理。当后面的中间件最终生成响应（或抛出异常），则响应通过中间件管道传递回到请求记录器，并在其中记录了结果并输出日志。所以这个中间件要放在尽量靠前的位置。
输出效果
倒数第二条日志就是RequestLoggingMiddleware输出的
[11:25:43 INF] Request starting HTTP/1.1 GET http://localhost:5000/weatherforecast
[11:25:43 INF] Executing endpoint 'SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest)'
[11:25:43 INF] Route matched with {action = "Get", controller = "WeatherForecast"}. Executing controller action with signature System.Collections.Generic.IEnumerable`1[SerilogTest.WeatherForecast] Get() on controller SerilogTest.Controllers.WeatherForecastController (SerilogTest).
[11:25:43 INF] Executing ObjectResult, writing value of type 'SerilogTest.WeatherForecast[]'.
[11:25:43 INF] Executed action SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest) in 22.9249ms
[11:25:43 INF] Executed endpoint 'SerilogTest.Controllers.WeatherForecastController.Get (SerilogTest)'
[11:25:43 INF] HTTP GET /weatherforecast responded 200 in 172.8042 ms
[11:25:43 INF] Request finished in 184.1417ms 200 application/json; charset=utf-8
有了RequestLoggingMiddleware输出的日志，就可以关闭系统记录的Information级别的日志了，这可以通过在Program.cs中设置LoggerConfiguration时增加MinimumLevel.Override("Microsoft", LogEventLevel.Warning)过滤器来实现：
Log.Logger = new LoggerConfiguration()
.MinimumLevel.Information()
.MinimumLevel.Override("Microsoft", LogEventLevel.Warning)
.Enrich.FromLogContext()
.WriteTo.Console()
.CreateLogger();
之后就只会输出一条日志：
[11:25:43 INF] HTTP GET /weatherforecast responded 200 in 172.8042 ms
输出Json格式
作为一款结构化日志组件，对Json格式的支持也是必不可少的，Serilog支持如下四种渲染方式：
- JsonFormatter
- JsonFormatter(renderMessage: true)
- CompactJsonFormatter
- RenderedCompactJsonFormatter
可以在配置LoggerConfiguration时开启Json输出，这里把文本格式+四种Json格式都开启，对比下它们之间的差异
Log.Logger = new LoggerConfiguration()
.MinimumLevel.Information()
.MinimumLevel.Override("Microsoft", LogEventLevel.Warning)
.Enrich.FromLogContext()
.WriteTo.Console()
.WriteTo.Console(new JsonFormatter())
.WriteTo.Console(new JsonFormatter(renderMessage: true))
.WriteTo.Console(new CompactJsonFormatter())
.WriteTo.Console(new RenderedCompactJsonFormatter())
.CreateLogger();
对比
// 文本
[12:58:08 INF] GET /weatherforecast responsed 200 in 60.439784 ms, localhost:5000, application/json; charset=utf-8, 1423
// JsonFormatter
{
"Timestamp": "2020-12-27T12:58:08.2277150+08:00",
"Level": "Information",
"MessageTemplate": "{RequestMethod} {RequestPath} responsed {StatusCode} in {Elapsed} ms, {RequestHost}, {ContentType}, {DataLoadTime}",
"Properties": {
"DataLoadTime": 1423,
"RequestHost": "localhost:5000",
"ContentType": "application/json; charset=utf-8",
"RequestMethod": "GET",
"RequestPath": "/weatherforecast",
"StatusCode": 200,
"Elapsed": 60.439784,
"SourceContext": "Serilog.AspNetCore.RequestLoggingMiddleware",
"RequestId": "0HM5A4G0BVC68:00000001",
"SpanId": "|dbf998b9-4418b3255ee44f3e.",
"TraceId": "dbf998b9-4418b3255ee44f3e",
"ParentId": "",
"ConnectionId": "0HM5A4G0BVC68"
}
}
// JsonFormatter(renderMessage: true)
{
"Timestamp": "2020-12-27T12:58:08.2277150+08:00",
"Level": "Information",
"MessageTemplate": "{RequestMethod} {RequestPath} responsed {StatusCode} in {Elapsed} ms, {RequestHost}, {ContentType}, {DataLoadTime}",
"RenderedMessage": "\"GET\" \"/weatherforecast\" responsed 200 in 60.439784 ms, \"localhost:5000\", \"application/json; charset=utf-8\", 1423",
"Properties": {
"DataLoadTime": 1423,
"RequestHost": "localhost:5000",
"ContentType": "application/json; charset=utf-8",
"RequestMethod": "GET",
"RequestPath": "/weatherforecast",
"StatusCode": 200,
"Elapsed": 60.439784,
"SourceContext": "Serilog.AspNetCore.RequestLoggingMiddleware",
"RequestId": "0HM5A4G0BVC68:00000001",
"SpanId": "|dbf998b9-4418b3255ee44f3e.",
"TraceId": "dbf998b9-4418b3255ee44f3e",
"ParentId": "",
"ConnectionId": "0HM5A4G0BVC68"
}
}
// CompactJsonFormatter
{
"@t": "2020-12-27T04:58:08.2277150Z",
"@mt": "{RequestMethod} {RequestPath} responsed {StatusCode} in {Elapsed} ms, {RequestHost}, {ContentType}, {DataLoadTime}",
"DataLoadTime": 1423,
"RequestHost": "localhost:5000",
"ContentType": "application/json; charset=utf-8",
"RequestMethod": "GET",
"RequestPath": "/weatherforecast",
"StatusCode": 200,
"Elapsed": 60.439784,
"SourceContext": "Serilog.AspNetCore.RequestLoggingMiddleware",
"RequestId": "0HM5A4G0BVC68:00000001",
"SpanId": "|dbf998b9-4418b3255ee44f3e.",
"TraceId": "dbf998b9-4418b3255ee44f3e",
"ParentId": "",
"ConnectionId": "0HM5A4G0BVC68"
}
// RenderedCompactJsonFormatter
{
"@t": "2020-12-27T04:58:08.2277150Z",
"@m": "\"GET\" \"/weatherforecast\" responsed 200 in 60.439784 ms, \"localhost:5000\", \"application/json; charset=utf-8\", 1423",
"@i": "54a66a75",
"DataLoadTime": 1423,
"RequestHost": "localhost:5000",
"ContentType": "application/json; charset=utf-8",
"RequestMethod": "GET",
"RequestPath": "/weatherforecast",
"StatusCode": 200,
"Elapsed": 60.439784,
"SourceContext": "Serilog.AspNetCore.RequestLoggingMiddleware",
"RequestId": "0HM5A4G0BVC68:00000001",
"SpanId": "|dbf998b9-4418b3255ee44f3e.",
"TraceId": "dbf998b9-4418b3255ee44f3e",
"ParentId": "",
"ConnectionId": "0HM5A4G0BVC68"
}
| JsonFormatter | 基础的Json格式，只有模版，没有日志全文 |
| JsonFormatter(renderMessage: true) | 相比JsonFormatter增加了RenderedMessage节点存储日志全文 |
| CompactJsonFormatter | 相比JsonFormatter，缩短了属性名，比如用@t代替Timestamp |
| RenderedCompactJsonFormatter | 相比CompactJsonFormatter，有日志全文(@m)，不再包含日志模版 |
Serilog默认只输出了如下几方面的信息：
- RequestMethod：GET
- RequestPath：/weatherforecast
- StatusCode：200
- Elapsed：172.8042 ms
日志虽然足够精简，但相比系统Log也缺少了一些有用的信息。后面Enrichment一节将介绍扩展的方法。
结构化日志
Serilog用Json格式来表示结构化日志。记录日志时使用类似C#字符串模版的方式。
默认格式
值类型、string、基于值类型或string的集合和Dictionary会被存储为Json对象的一个属性，比如：
var count = 333;
Log.Error("Retrieved {Count} records", count);
var c = new List<string> {"a", "b"};
Log.Information("list is {List}", c);
会被分别存储为：
{
...
"Count":333
...
}
{
...
"List":["a","b"]
...
}
@运算符
如果要记录的是一个class的实例，用上面的记录方式会强制调用ToString方法，并不会拿到内部属性的值。所以对于除值类型和基于值类型的集合、Dictionary之外的数据结构，应该使用@运算符，将这个实例内部的值存储为Json对象
var dto = new FakeDTO { A = "A",B="B"};
Log.Information("test is {FakeDTO}", dto);
// 输出："FakeDTO":"SerilogTest.Controllers.FakeDTO"
Log.Information("test is {@FakeDTO}", dto);
// 输出：,"FakeDTO":{"A":"A","B":"B","C":null,"D":null,"E":null,"$type":"FakeDTO"}
...
public class FakeDTO
{
public string A { get; set; }
public string B { get; set; }
public string C { get; set; }
public string D { get; set; }
public string E { get; set; }
}
自定义要保存的属性
@运算符虽然可以将类转化为Json，但如果只需要记录类中的一部分属性，比如FakeDTO只对其A和B感兴趣，可以通过在LoggerConfiguration中配置Destructure来让Json中只包含需要的属性。
Log.Logger = new LoggerConfiguration()
...
.Destructure.ByTransforming<FakeDTO>(r => new {A1 = r.A, B1 = r.B})
// 输出："FakeDTO":{"A1":"A","B1":"B"}
关于性能的注意事项
尽量使用模版的方式，而不是由自己拼接日志内容：
// Do:
Log.Information("The time is {Now}", DateTime.Now);
// Don't:
Log.Information("The time is " + DateTime.Now);
这两种方式可能在性能上会有差别，比如当提高到Log级别限制为Warning后，即使Info级别的日志不再被输出，后者仍然会执行拼接字符串的操作，而模版方式不会出现这样的问题，在日志记录较多的场合，两者将会有明显的性能差距。
Enrichment
Serilog也提供了通过Enricher扩展其请求日志信息的方法。
列举部分Enrichers
| Serilog.Enrichers.Thread | WithThreadId() |
| Serilog.Enrichers.Environment | WithMachineName() and WithEnvironmentUserName() |
| Serilog.Enrichers.Process | WithProcessId() |
| Serilog.Web.Classic | WithHttpRequestId() |
| Serilog.Exceptions | WithExceptionDetails() |
| Serilog.Enrichers.Demystify | WithDemystifiedStackTraces() |
| Serilog.Enrichers.CorrelationId | WithCorrelationId |
| Serilog.Enrichers.ClientInfo | WithClientIp() and WithClientAgent() |
要使用这些Enricher，需要在配置LoggerConfiguration的时候添加，比如：
Log.Logger = new LoggerConfiguration()
.Enrich.WithThreadId()
...
自定义要扩展信息
使用Enrich.WithProperty可以更灵活地添加扩展信息，比如添加IP地址，然后在记Log的地方通过{IP}模版就可以拿到了。
.Enrich.WithProperty("IP", "127.0.0.1")
为RequestLog添加扩展信息
除了使用Serilog已经提供的Enrichers，还可以通过在引入使用RequestLoggingMiddleware时增加如下配置：
app.UseSerilogRequestLogging(options =>
{
// Customize the message template
options.MessageTemplate = "{RequestMethod} {RequestPath} responsed {StatusCode} in {Elapsed} ms, {RequestHost}, {ContentType}";
// Attach additional properties to the request completion event
options.EnrichDiagnosticContext = (diagnosticContext, httpContext) =>
{
diagnosticContext.Set("RequestHost", httpContext.Request.Host.Value);
diagnosticContext.Set("ContentType", httpContext.Response.ContentType);
};
});
这样RequestHost和ContentType就被添加到RequestLog中了，此处的MessageTemplate必须设置，否则日志中不会包含新添加的信息。
[12:03:19 INF] GET /weatherforecast responsed 200 in 62.095594 ms, localhost:5000, application/json; charset=utf-8
此外由于Serilog已经将IDiagnosticContext作为单例添加到DI容器中，因此可以从任何类中访问diagnosticContext并为某些属性设置值，但UseSerilogRequestLogging处设置值的优先级是最高的。
LogContext
使用LogContext还可以在局部动态地覆盖某些属性的值。 首先添加Enricher
Log.Logger = new LoggerConfiguration()
.Enrich.FromLogContext()
...
然后就可以使用LogContext.PushProperty来进行属性覆盖了，在Log输出的Properties节点下就会增加刚才Push的属性。PushProperty会将指定的属性Push到栈顶，并返回一个IDisposeable对象，在这个IDisposeable对象被释放之前，遇到要输出的Log中存在这一属性的地方，就会从栈中拿到它的值。对于同一属性，后Push的值是优先级更高的。
var A = "A1";
log.Information("value = {A}", A); // value = A1
using (LogContext.PushProperty("A", "A2"))
{
log.Information("value = {A}"); // value = A2
using (LogContext.PushProperty("A", "A3"))
{
log.Information("value = {A}"); // value = A3
}
log.Information("value = {A}"); // value = A2
}
log.Information("value = {A}"); // value = {A}
Json配置
Serilog也提供了Json文件配置的方式，便于在不同的部署环境使用不同的配置。 首先添加关于Json文件的配置
var configuration = new ConfigurationBuilder()
.SetBasePath(Directory.GetCurrentDirectory())
.AddJsonFile("appsettings.json", optional:false)
.AddJsonFile($"appsettings.{Environment.GetEnvironmentVariable("ASPNETCORE_ENVIRONMENT") ?? "Production"}.json", optional: true)
.Build();
然后前面用代码配置的方式就可以被替换掉了，使用了ReadFrom.Configuration(), sectionName指定了配置的根节点，如果没有设置sectionName则使用默认值“Serilog”。
// Log.Logger = new LoggerConfiguration()
// .MinimumLevel.Information()
// .MinimumLevel.Override("Microsoft", LogEventLevel.Warning)
// .Enrich.FromLogContext()
// .Destructure.ByTransforming<FakeDTO>(r => new {A1 = r.A, B1 = r.B})
// .WriteTo.Console()
// .WriteTo.Console(new RenderedCompactJsonFormatter())
// .CreateLogger();
Log.Logger = new LoggerConfiguration()
.ReadFrom.Configuration(configuration, sectionName: "CustomSection")
.CreateLogger();
Json配置方式的局限
但Json配置的方式相对代码的方式也有很多局限。在用来配置日志级别、要Override的系统日志级别、Enricher、简单的WriteTo等是没有问题的。但自定义的Destructure还有JsonFormatter等还是需要用代码方式的。
{
"CustomSection": {
"MinimumLevel": "Information",
"WriteTo": [
{ "Name": "Console" }
],
"Override": {
"Microsoft": "Information"
},
"Enrich": [ "FromLogContext", "WithMachineName" ]
]
}
}