输入要与Node.js模块连接的文件列表fluent-ffmpeg

问题描述

• fluent-ffmpeg版本:2.1.2
• ffmpeg版本:3.4.2
• 操作系统:Windows 10

ffmpeg('C:/path/to/list.txt').mergeToFile('C:/path/to/out.mp4', 'C:/path/to/temp');

list.txt:

file 'C:/path/to/chunk01.ts'
file 'C:/path/to/chunk02.ts'
file 'C:/path/to/chunk03.ts'
file 'C:/path/to/chunk04.ts'

注意:我尝试了绝对路径和相对路径，结果相同.

Note: I've tried both absolute and relative paths, with the same result.

位于C:/path/to/out.mp4的视频文件，与list.txt中的4个文件首尾相连.

A video file at C:/path/to/out.mp4 that matches the 4 files in list.txt, concatenated end-to-end.

C:/path/to/out.mp4处的一个空文件，持续时间为0，大小仅为15kB.没有抛出任何错误.

An empty file at C:/path/to/out.mp4 with 0 duration and only 15kB in size. No errors were thrown.

这是我要复制的命令(它按预期运行，并且在list.txt中具有相对路径):

This is the command that I'm trying to duplicate (it works as expected, with relative paths in list.txt):

C:/path/to> ffmpeg -f concat -i list.txt -c copy out.ts

stdout& stderr

stdout为空. stderr复制到下面(文件名被修改为与上面的文件名匹配):

stdout & stderr

stdout was empty. stderr is copied below (with file names modified to match the ones above):

ffmpeg version 3.4.2 Copyright (c) 2000-2018 the FFmpeg developers
  built with gcc 7.3.0 (GCC)
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-bzlib --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libmfx --enable-cuda --enable-cuvid --enable-d3d11va --enable-nvenc --enable-dxva2 --enable-avisynth
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
Input #0, tty, from 'C:/path/to/list.txt':
  Duration: 00:00:00.08, bitrate: 42 kb/s
    Stream #0:0: Video: ansi, pal8, 640x400, 25 fps, 25 tbr, 25 tbn, 25 tbc
Stream mapping:
  Stream #0:0 (ansi) -> concat
  concat -> Stream #0:0 (libx264)
Press [q] to stop, [?] for help
[libx264 @ 000001e385b45040] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 000001e385b45040] profile High 4:4:4 Predictive, level 3.0, 4:4:4 8-bit
[libx264 @ 000001e385b45040] 264 - core 155 r2901 7d0ff22 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'C:/path/to/out.mp4':
  Metadata:
    encoder         : Lavf57.83.100
    Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv444p, 640x400, q=-1--1, 25 fps, 12800 tbn, 25 tbc
    Metadata:
      encoder         : Lavc57.107.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
frame=    2 fps=0.0 q=-1.0 Lsize=      15kB time=00:00:00.04 bitrate=3099.0kbits/s speed=1.55x
video:14kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 5.619430%
[libx264 @ 000001e385b45040] frame I:1     Avg QP:12.71  size:  8083
[libx264 @ 000001e385b45040] frame P:1     Avg QP:29.71  size:  5928
[libx264 @ 000001e385b45040] mb I  I16..4: 87.9%  0.0% 12.1%
[libx264 @ 000001e385b45040] mb P  I16..4:  9.3%  0.0%  0.0%  P16..4:  0.4%  0.0%  0.0%  0.0%  0.0% skip:90.3%
[libx264 @ 000001e385b45040] coded y,u,v intra: 17.9% 0.0% 0.0% inter: 0.1% 0.0% 0.0%
[libx264 @ 000001e385b45040] i16 v,h,dc,p: 88%  8%  4%  0%
[libx264 @ 000001e385b45040] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 28% 31% 19%  3%  2%  3%  7%  4%  3%
[libx264 @ 000001e385b45040] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 000001e385b45040] kb/s:1401.10

推荐答案

将ffconcat version 1.0添加到文本文件的开头，即

Add ffconcat version 1.0 to the start of your text file i.e.

ffconcat version 1.0
file 'C:/path/to/chunk01.ts'
file 'C:/path/to/chunk02.ts'
...

或者，这是对现有文本文件的修改后的cmd，但是我对fluent-ffmpeg并不熟悉.

Alternatively, this is the modified cmd with the existing text file, but I'm not well-acquainted with fluent-ffmpeg.

ffmpeg('C:/path/to/list.txt').inputFormat('concat').mergeToFile('C:/path/to/out.mp4', 'C:/path/to/temp');

这篇关于输入要与Node.js模块连接的文件列表fluent-ffmpeg的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！