问题描述
从xcode 5.0移至5.1时，GPUImage Library中出现以下错误.在Google上搜索后，我发现我需要发送此类[NSNumber numberWithInt:number]的int，但问题是我无法控制在以下给定代码中传递给sortedArrayUsingComparator的值.
Getting below error in GPUImage Library when moved from xcode 5.0 to 5.1. After searching on google i found that i need to send int like this [NSNumber numberWithInt:number] but issue is that i dont have control on the value getting passed to sortedArrayUsingComparator in below given code.
错误日志:
不兼容的块指针类型将'int(^)(__ strong id，_ strong id)'发送到类型'NSComparator'的参数(aka'NSComparisonResult(^)( _strong id，__strong id) ')
Incompatible block pointer types sending 'int (^)(__strong id, _strong id)' to parameter of type 'NSComparator' (aka 'NSComparisonResult (^)(_strong id, __strong id)')
此行的错误:NSArray * sortedPoints = [点sortedArrayUsingComparator:^(id a，id b){
Error on this line : NSArray *sortedPoints = [points sortedArrayUsingComparator:^(id a, id b) {
- (id) initWithCurveFile:(NSString*)curveFile
{
self = [super init];
if (self != nil)
{
NSString *bundleCurvePath = [[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent: curveFile];
NSFileHandle* file = [NSFileHandle fileHandleForReadingAtPath: bundleCurvePath];
if (file == nil)
{
NSLog(@"Failed to open file");
return self;
}
NSData *databuffer;
// 2 bytes, Version ( = 1 or = 4)
databuffer = [file readDataOfLength: 2];
version = CFSwapInt16BigToHost(*(int*)([databuffer bytes]));
// 2 bytes, Count of curves in the file.
[file seekToFileOffset:2];
databuffer = [file readDataOfLength:2];
totalCurves = CFSwapInt16BigToHost(*(int*)([databuffer bytes]));
NSMutableArray *curves = [NSMutableArray new];
float pointRate = (1.0 / 255);
// The following is the data for each curve specified by count above
for (NSInteger x = 0; x<totalCurves; x++)
{
// 2 bytes, Count of points in the curve (short integer from 2...19)
databuffer = [file readDataOfLength:2];
short pointCount = CFSwapInt16BigToHost(*(int*)([databuffer bytes]));
NSMutableArray *points = [NSMutableArray new];
// point count * 4
// Curve points. Each curve point is a pair of short integers where
// the first number is the output value (vertical coordinate on the
// Curves dialog graph) and the second is the input value. All coordinates have range 0 to 255.
for (NSInteger y = 0; y<pointCount; y++)
{
databuffer = [file readDataOfLength:2];
short y = CFSwapInt16BigToHost(*(int*)([databuffer bytes]));
databuffer = [file readDataOfLength:2];
short x = CFSwapInt16BigToHost(*(int*)([databuffer bytes]));
[points addObject:[NSValue valueWithCGSize:CGSizeMake(x * pointRate, y * pointRate)]];
}
[curves addObject:points];
}
[file closeFile];
rgbCompositeCurvePoints = [curves objectAtIndex:0];
redCurvePoints = [curves objectAtIndex:1];
greenCurvePoints = [curves objectAtIndex:2];
blueCurvePoints = [curves objectAtIndex:3];
}
return self;
}
- (NSArray *)getPreparedSplineCurve:(NSArray *)points
{
if (points && [points count] > 0)
{
// Sort the array.
NSArray *sortedPoints = [points sortedArrayUsingComparator:^(id a, id b) {
float x1 = [(NSValue *)a CGPointValue].x;
float x2 = [(NSValue *)b CGPointValue].x;
return x1 > x2;
}];
// Convert from (0, 1) to (0, 255).
NSMutableArray *convertedPoints = [NSMutableArray arrayWithCapacity:[sortedPoints count]];
for (int i=0; i<[points count]; i++){
CGPoint point = [[sortedPoints objectAtIndex:i] CGPointValue];
point.x = point.x * 255;
point.y = point.y * 255;
[convertedPoints addObject:[NSValue valueWithCGPoint:point]];
}
NSMutableArray *splinePoints = [self splineCurve:convertedPoints];
// If we have a first point like (0.3, 0) we'll be missing some points at the beginning
// that should be 0.
CGPoint firstSplinePoint = [[splinePoints objectAtIndex:0] CGPointValue];
if (firstSplinePoint.x > 0) {
for (int i=0; i <=firstSplinePoint.x; i++) {
CGPoint newCGPoint = CGPointMake(0, 0);
[splinePoints insertObject:[NSValue valueWithCGPoint:newCGPoint] atIndex:0];
}
}
// Prepare the spline points.
NSMutableArray *preparedSplinePoints = [NSMutableArray arrayWithCapacity:[splinePoints count]];
for (int i=0; i<[splinePoints count]; i++)
{
CGPoint newPoint = [[splinePoints objectAtIndex:i] CGPointValue];
CGPoint origPoint = CGPointMake(newPoint.x, newPoint.x);
float distance = sqrt(pow((origPoint.x - newPoint.x), 2.0) + pow((origPoint.y - newPoint.y), 2.0));
if (origPoint.y > newPoint.y)
{
distance = -distance;
}
[preparedSplinePoints addObject:[NSNumber numberWithFloat:distance]];
}
return preparedSplinePoints;
}
return nil;
}
推荐答案
比较块必须返回NSComparisonResult，即NSOrderedAscending，NSOrderedSame或NSOrderedDescending(又称-1，0，+1)，取决于第一个元素是小于，等于还是大于第二个元素.
A comparison block must return a NSComparisonResult, which isNSOrderedAscending, NSOrderedSame, or NSOrderedDescending (a.k.a. -1, 0, +1),depending on whether the first element is smaller, equal to or larger than the second element).
返回x1 > x2不满足此要求，并且编译器抱怨是因为它从最后一条语句推断"返回类型为int.
Returning x1 > x2 does not fulfill this requirement, and the compiler complains becauseit "infers" the return type as int from the last statement.
要解决此问题，您可以
- 使用中的技术>是否有标准符号C/C ++中的函数(signum，sgn)?返回
-1，0或+1，和 - 将块的返回类型显式声明为
NSComparisonResult使编译器满意.
- use the technique from Is there a standard sign function (signum, sgn) in C/C++? to return
-1,0, or+1, and - declare the return type of the block explicitly as
NSComparisonResultto make the compiler happy.
您还可以通过将块参数声明为来稍微简化代码NSValue *.
You can also simplify the code slightly by declaring the block parameters asNSValue *.
NSArray *sortedPoints = [points sortedArrayUsingComparator:^NSComparisonResult(NSValue *a, NSValue *b) {
float x1 = [a CGPointValue].x;
float x2 = [b CGPointValue].x;
return (x1 > x2) - (x2 > x1); // -1, 0, or +1
}];
这篇关于不兼容的块指针类型向'NSComparator'类型的参数发送'int(^)(__ strong id，__strong id)'的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！