本文介绍了Linux 上 C blueZ 中的蓝牙配对的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

在使用 BlueZ 蓝牙库用 C 编写的程序中,我找不到有关如何在 linux 上配对蓝牙设备的任何参考资料.我已经设法进行 HCI 级别查询以获取设备及其 RSSI 级别(在设备发现期间),但目前我坚持这一点.我看到了将 DBUS api 用于 blueZ-simple-agent 的建议 - 但是有什么方法可以避免这种情况而只使用 BlueZ 的一些 C 级方法吗?

I cannot find any reference on how to pair a bluetooth device on linux in a program written in C using the BlueZ Bluetooth libraries. I already managed to do a HCI level query to get devices along with thier RSSI levels (during the device discovery) but currently I am stuck with this. I saw a suggestion to use the DBUS api for the blueZ-simple-agent - but is there any way to avoid this and just use some C level methods from BlueZ?

推荐答案

Authentication code from hcitool (原始源代码可以在 http://git.kernel.org/cgit/bluetooth/bluez.git/tree/tools/hcitool.c)

Authentication code from hcitool (original source code can see at http://git.kernel.org/cgit/bluetooth/bluez.git/tree/tools/hcitool.c)

/* Request authentication */

static void cmd_auth(int dev_id, int argc, char **argv)
{
        struct hci_conn_info_req *cr;
        bdaddr_t bdaddr;
        int opt, dd;

        for_each_opt(opt, auth_options, NULL) {
            switch (opt) {
            default:
                printf("%s", auth_help);
                return;
            }
        }
        helper_arg(1, 1, &argc, &argv, auth_help);

        str2ba(argv[0], &bdaddr);

        if (dev_id < 0) {
            dev_id = hci_for_each_dev(HCI_UP, find_conn, (long) &bdaddr);
            if (dev_id < 0) {
                fprintf(stderr, "Not connected.
");
                exit(1);
            }
        }

        dd = hci_open_dev(dev_id);
        if (dd < 0) {
            perror("HCI device open failed");
            exit(1);
        }

        cr = malloc(sizeof(*cr) + sizeof(struct hci_conn_info));
        if (!cr) {
            perror("Can't allocate memory");
            exit(1);
        }

        bacpy(&cr->bdaddr, &bdaddr);
        cr->type = ACL_LINK;
        if (ioctl(dd, HCIGETCONNINFO, (unsigned long) cr) < 0) {
            perror("Get connection info failed");
            exit(1);
        }

        if (hci_authenticate_link(dd, htobs(cr->conn_info->handle), 25000) < 0) {
            perror("HCI authentication request failed");
            exit(1);
        }

        free(cr);

        hci_close_dev(dd);
}

并设置 PIN 码

/* Activate encryption */

static void cmd_enc(int dev_id, int argc, char **argv)
{
    struct hci_conn_info_req *cr;
    bdaddr_t bdaddr;
    uint8_t encrypt;
    int opt, dd;

    for_each_opt(opt, enc_options, NULL) {
        switch (opt) {
        default:
            printf("%s", enc_help);
            return;
        }
    }
    helper_arg(1, 2, &argc, &argv, enc_help);

    str2ba(argv[0], &bdaddr);

    if (dev_id < 0) {
        dev_id = hci_for_each_dev(HCI_UP, find_conn, (long) &bdaddr);
        if (dev_id < 0) {
            fprintf(stderr, "Not connected.
");
            exit(1);
        }
    }

    dd = hci_open_dev(dev_id);
    if (dd < 0) {
        perror("HCI device open failed");
        exit(1);
    }

    cr = malloc(sizeof(*cr) + sizeof(struct hci_conn_info));
    if (!cr) {
        perror("Can't allocate memory");
        exit(1);
    }

    bacpy(&cr->bdaddr, &bdaddr);
    cr->type = ACL_LINK;
    if (ioctl(dd, HCIGETCONNINFO, (unsigned long) cr) < 0) {
        perror("Get connection info failed");
        exit(1);
    }

    encrypt = (argc > 1) ? atoi(argv[1]) : 1;

    if (hci_encrypt_link(dd, htobs(cr->conn_info->handle), encrypt, 25000) < 0) {
        perror("HCI set encryption request failed");
        exit(1);
    }

    free(cr);

    hci_close_dev(dd);
}

这篇关于Linux 上 C blueZ 中的蓝牙配对的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持!

06-26 08:16